Semiconductor Parts Vacuum Equipment with Ab Materials Potting Dispenser System Stand-Alone Vacuum Chamber Potting Machine

• Customization: Available
• After-sales Service: Provided
• Precision: High Precision
• Model NO.: VGB-450Q
• Certification: CCC, CE
• Warranty: 12 Months
• Automatic Grade: Automatic
• Installation: Vertical
• Driven Type: Electric
• Glue & Ratio: 1:1 to 20:1, Epoxy, Silicone, PU, UV
• Certificate: CE, SGS
• Xyz Working Area: 700*700*80mm
• Flow Speed: 0-66g/5s, or Customized
• Additional Function: Heating, Vacuum, Self-Refilling, Self-Cleaning
• Transport Package: Wood Box
• Specification: 1500x1200x1500mm
• Trademark: DH
• Origin: China

Product Description

Semiconductor parts vacuum equipment

We Daheng Automation specialize in different types of potting and dispensing system. No matter what your resin application requirements look like: we can do most of them in our fully equipped lab. We can handle 1- and 2-component polyurethanes, epoxies, acrylics, silicones, temperature, humidity and UV curing materials. They can be from low- to high-viscosity, filled or unfilled and even high abrasive for thermal conductivity.

Potting and encapsulation is the process of embedding electronic components & assemblies in a liquid resin (potting compounds) to protect them against rough environment conditions. Potting can be performed in atmosphere pressure or even under vacuum, if high voltage insulation and high temperature differences are needed. Encapsulation of parts will stop corrosion of metals and reduce damage caused by vibration and mechanical stress.


 

More pictures :



1. Quantify metering system with high precision(±1-2%), suitable for middle to low viscosity two component material ratio .
2. Adapting foreign technology that further improved sealing position and metering in good accuracy.
3. Graphite sealing components ; stainless pump ; stainless connector ensure the pump with long lifespan and anti corruption .
4. Metering pump have Daheng high pressure and high precision double liquid valve , with vary sealing methods and adjustable retract function, that is convenient for glue valve cleaning and precision glue dispensing .
5. Controlling system can program resin dispensing in high precision and reserved many glue dispensing programs .
6.. Inset self-check controlling system module makes fault detection rapidly .
7. Through different collections of metering pumps realize the changeable ratio from 1:1 to 10:1 . 8. Keep steady dispensing design , the glue-amount can be adjusted from 0.5g/s~12g/s per single pump, ab pump dispensing amount can be set accordingly to ab ratio . 9.Double cylinder plunger pump's structure especially suitable for high additive ,high density materials . The lifespan is designed for 10 years .



1.The mixing motor drive the blade to stir the glue evenly. The mixing process totally seal ; the double liquid valve and mixing pipe filled with glue that assured glue mixing without any air bubble;the valve through turn on-off the air-cylinder to keep glue suck well and prevent  glue from dropping .
2. Stirring motor speed is 2000r/m, which can fully stir glue evenly.
3. Mixing pipe is consumable that from Sulzer Mixpac MR13-12; as per machine downtime , the mixers should be cleaned or soaked in cleaning fluid.
4.Dynamic mixing with stirring detecting function(optional) that ensure glue mixing evenly .
5. Stainless design of the glue touch surface to capture more higher material compatibility .
6.Glue valve with flow-back prevent function that can prevent mixture from dropping when stop dispensing .
7. Sealing parts of rod shaft adopt imported parts to keep more higher durability .
8. The self-cleaning function make machine cleaning more easier that you needn't dis-assembly the parts to wash . Cleaning time and cleaning times could be set in the touch screen.

PLC Operation Controlling System
5.1 Dispensing volume is controlled by the speed of pump's motors ; Glue speed adjustable within the speed range .
5.2 Machine with detecting function that detect the speed and running time of pumps to ensure the ratio reliability.
5.3 Adjustable gluing-out volume make sure glue A/B dispense out at the same time from glue valve to get better glue mixing effect .
5.4 Machine with gel resistance calculator , which prevent the mixture curing inside .
5.5 You can set single gluing-out and steady gluing-out function to meet up with your different process requirement .
5.6 Whole machine system and function is controlled by Panasonic PLC and MGCS touch screen .
5.7 Reserved PLC communication interface, which easy connecting with outside device .
5.8 Equipped with a safety lock to prevent staff from wrong operation .

Application :





Potting&Encapsulation &Casting:
Electronics componnets , PCB board, Capacitor, power supply, transformer, ignition coil, E-motors ,reverse sensor, circuit board, filter products ,underwater parts, electronic ballast ,aviation parts, aerospace parts....

Corner of workshop :

After sales service :

1, Staff training Seller is responsible to provide machine's training including installation, debugging, maintenance to assured customer can totally use the operation skills and well acknowledge maintenance of machine .

Maintenance Service  

2.1Seller provide one year warranty period and support free maintenance service during warranty . Software upgrade service is provided for a long life time.  
2.2 In case parts of the machine become broken within the warranty because of non-artificial factors, we send you part replacement free, buyer pay for the shipment. Double-liquid valve should be bought at its cost price.
2.3If the parts of the machine become broken past warranty , the parts replacement should be shouldered by buyer.

Shipping&Delivery