Epoxies filling AB potting compound material Meter-mix dispensing machine
Epoxies filling AB potting compound material Meter mix machine
We Daheng Automation specialize in different types of potting and dispensing system. No matter what your resin application requirements look like: we can do most of them in our fully equipped lab. We can handle 1- and 2-component polyurethanes, epoxies, acrylics, silicones, temperature, humidity and UV curing materials. They can be from low- to high-viscosity, filled or unfilled and even high abrasive for thermal conductivity.
Potting and encapsulation is the process of embedding products & assemblies in a liquid resin (potting compounds) to protect them against rough environment conditions. Potting can be performed in atmosphere pressure or even under vacuum, if high voltage insulation and high temperature differences are needed. Encapsulation of parts will stop corrosion of metals and reduce damage caused by vibration and mechanical stress.
We offer automatic ,se-mi automatic fluid dispensing potting machine and the related production line and vacuuming systems .2 Part Silicone plyurethane epoxy potting dispensing machine
AB Resins compound dosing , dispensing ,potting system ,2K potting technology AB glue dispensing machine Epoxy dispensing machine
Two-component dispensing machine,Dual-component dispensing machine
Meter-mix dispensing machine,Resin dispensing machine
Adhesive dispensing system,Dispensing robot with high precision Dispensing valve, AB Liquid dispenser , Automated dispensing equipment
2. Application :
1.Potting&Encapsulation &Casting: electronics componnets , PCB board, Capacitor, power supply, transformer, ignition coil, reverse sensor, circuit board, filter products ,underwater parts, electronic ballast ,aviation parts, aerospace parts.... 2.Dispensing&Dosing :
LED strip , led lamp , led bulb , aluminum,led screen , display module ,medical parts,medical liquid filling .... 3.Bonding&doming : LCD screen ,LOCA bonding,ABS plastic,different types of stickers , badge , keychains , souvenirs ,arts , photo frame , and other arts graphics....
3. Machine parameter
| Item No.: |
PJL-1200 |
| AB ratio: |
100:100-100:10 adjustable |
| Movment Track: |
Dot/Line/Arc/Circle |
| Speed: |
500mm/s(Movement speed) 1-12ml/s(gluing out speed) |
| Accuracy: |
±2%(potting) ±2%(mixing) |
| Input pressure: |
0.5MPa-0.7MPa |
| Viscosity: |
50cps-30000cps(Viscosity can be down via heating glue) |
| Operation: |
Manual/Automatic |
| Meter Pump: |
Gear pump/Screw pump/Double cylinder plunger pump |
| Flow Control: |
Digital Input |
| Programming method: |
Teaching programming |
| Automated control system: |
PLC / touch screen (programming, modification, storage, etc.) |
| Glue control system: |
AB glue suction valve to achieve independent operation of AB glue |
| Mixed mode: |
dynamic static optional, instant mixing, easy to clean |
| Tank: |
stainless steel tank (60L),(50L),(40L),(25L),(10L)optional |
| Power supply: |
220V/50Hz/1200W ( Test under heating unction is not power on) |
4. Characteristic
PJL-1500 Glue mixing machine
Features
Stainless steel table
Suitable for multiple scenes
Free to control, easy to learn
PJL-1200 Standard dispensing machine
Multiple configuration, suitable for a variety of products
High versatility and high cost performance
Suitable for various products
Can be used with production lines
PJL-1000
Dimension: 1050*1000*1700mm
PJL-1500
Dimension: 1500*1000*1700MM
PJL-1200
Dimension: 1650*750*1900MM
5. Working principle
Liquid A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine, draining out liquids individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.
1, Staff training Seller is responsible to provide machine's training including installation, debugging, maintenance to assured customer can totally use the operation skills and well acknowledge maintenance of machine .
2,Maintenance Service 2.1Seller provide one year warranty period and support free maintenance service during warranty . Software upgrade service is provided for a long life time.
2.2 In case parts of the machine become broken within the warranty because of non-artificial factors, we send you part replacement free, buyer pay for the shipment. Double-liquid valve should be bought at its cost price.
2.3If the parts of the machine become broken past warranty , the parts replacement should be shouldered by buyer.
){kind=link}