| Customization: | Available |
|---|---|
| After-sales Service: | One Year |
| Precision: | High Precision |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment methods: |
|
|---|---|
| Support payment in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Polyurethane Dispensing Machine Epoxy Micro Dispensing Machine
We Daheng Automation specialize in different types of potting and dispensing system. No matter what your resin application requirements look like,we can do most of them in our fully equipped lab. We can handle 1- and 2-component polyurethanes, epoxies, acrylics, silicons, temperature, humidity and UV curing materials. They can be from low- to high-viscosity, and even high abrasive ,high fillers ,high density for thermal conductivity.
Potting and dispensing is the process of embedding products & assemblies in a liquid resin (potting compounds) to protect them against rough environment conditions. Potting can be performed in atmosphere pressure or even under vacuum, if high voltage insulation and high temperature differences are needed. Potting insulation of parts will stop corrosion of metals and reduce damage caused by vibration and mechanical stress.
We offer automatic ,se-mi automatic fluid dispensing potting machine and the related production line and vacuuming systems .2 Part Silicone plyurethane epoxy potting dispensing machine AB Resins compound dosing , dispensing ,potting system ,2K potting technology AB glue dispensing machine Epoxy dispensing machine Two-component dispensing machine,Dual-component dispensing machine,Meter-mix dispensing machine,Resin dispensing machine Adhesive dispensing system,Dispensing robot with high precision Dispensing valve, Liquid dispenser , Automated dispensing equipment
Introduction:
1. Working Mode: controlled by PLC module and MCGS touch screen.
2.High precision valve: high speed, glue off clean, no glue drawing, no dropping.
3. Core metering pump specially design for different material from low to high viscosities.
4. Mix glue A & B more evenly; no more or no less for agent B.
Working principle:
Compound materials A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine for metering A and B resin by setting ratio, draining out material individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.
Features:
1. Stainless panel vacuum pressure tank which can bear negative pressure of inner tank .
2. Tank with motor stirrer that prevent the glue from sediment and keep the potting material in constant temperature
3. Tank with top/ high /low liquid sensors that ensure alarm warning when liquid higher or lower the setting level .
4. Tank with vacuum degas (degas time can be set through touch screen), so the material can be re-feeding through vacuum negative pressure .
5. Tank with pressure releasing ball valve ; the bottom of tank reserved back-flow connector and river closure ball valve
6 .Tank with heater which can preheat materials to assure good flowability .
7. Tank with artificial feeding mouth that can be added glue appropriately by hand .
8 Tank with silica-dryer which can prevent material especially PU from crystallization .D&H Pump technology
D&H Pump technology
1. Two cylinder plunger pumps work by durable motors.
2.The biggest flow volume :24g/s,Repetition accuracy:0.2g.
3.Also Suitable for high viscosity glue: 50cps~35000cps.
4. Suitable for big flow dispensing or slight flow dispensing.
5. Suitable for frequent start and stop dispensing.
6. Anti-wear, Anti-corrosion, super long life time.
Valve technology
1. Two cylinder plunger pumps work by durable motors.
2.The biggest flow volume :24g/s,Repetition accuracy:0.2g.
3.Also Suitable for high viscosity glue: 50cps~35000cps.
4. Suitable for big flow dispensing or slight flow dispensing.
5. Suitable for frequent start and stop dispensing.
6. Anti-wear, Anti-corrosion, super long life time.
Specification:
|
Model No: |
PGB-810 |
|
Mixing Ratio |
100:100-10:100(1:1-1:10) Adjustable |
|
Metering precision |
±2%(output volume)±2%(mixing) |
|
Outflow speed |
1g/sec-15g/sec |
|
Mixing precision |
±1% |
|
Mixing mode |
Dynamic mixing /Static mixing |
|
Glue Viscosity |
Lower than 20000 CPS(mPa·s) |
|
Control mode |
PLC + Touch Screen |
|
Control system |
Independent R&D |
|
Measuring mode |
Stepping motor/High-precision, wear-resistant, long-life Gear pump |
|
Working voltage |
AC 220V 50Hz/60Hz |
|
Power requirement |
3.55KW |
|
Air pressure requirement |
4.5-8KG |
|
Machine Dimension |
1500(L)*1200(W)*1500(H)mm |
|
Weight |
approx 260 KG |
|
Work environment |
Humidity: 20%~98%RH; Temperature: 0~+40°c |
PLC Operation Controlling System
1 Dispensing volume is controlled by the speed of pump's motors ; Glue speed adjustable within the speed range .
Suitable Material: For waterproof, adhesive, fixed two-component adhesive.
Such as: Crystal or less additive glue --Silicone, epoxy, polyurethane(PU), etc.
Applications:LED products ,Crafts,Electronic components
Such as:Wall washer light, LED bar, LED strip, Ads module, Sensor, Photovoltaic module, Photovoltaic inverter .etc
IApplication
){kind=link}