Metering Mixing and Dispensing Machine PU Resin Dynamic Polyurethane Dosing System Ab Part Silicone Epoxy Resin Machine

• Customization: Available
• Precision: High Precision
• Condition: New
• Warranty: 12 Months
• Automatic Grade: Semiautomatic
• Installation: Vertical
• Driven Type: Electric
• Tank Volume: 10L,25L,40L
• Mixing Method: Dynamic / Static
• Transport Package: Wooden Packing
• Trademark: D&H
• Origin: China
• HS Code: 8424899990
• Production Capacity: 50PCS Per Month

Product Description

Metering Mixing and Dispensing Machine PU Resin Dynamic Polyurethane Dosing System 2 Component Silicone Epoxy Resin Machine

Choosing Meter Mix Dispense Equipment
In applications the dual cartridges are impractical due to large quantities used. Dispensing equipment can be used to assure the correct mix ratio, then the adhesive is dispensed through adynamic /static mix tip.
Piston Pump metering and mixing dispensing equipment is ideal for higher viscosity epoxy and medium production output.
Cylinder pump metering and mixing dispensing equipment is preferred for lower viscosity adhesives and are used in fully automated high production environments.

2-component dosing / dispensing
Nowadays a modern production without two-component materials is unimaginable. 
I.Machine description and working principle

Automatic glue mixing machine is mainly used for a two-component glue( Epoxy/ Silicone/PU,etc adhesive), automatic metering and mixing the ratio of glue. The glue are stored in two barrels separately, according the glue weight ratio and volume demand automatic metering by two sets of precision pump, supply to a mixing device fully mixing, and then potting/dispensing the desired products.
II.Main Function:
1.Automatic metering and mixing
2.Manual Gluing
3.Auto alarm for lack of material or full material
4.Gluing ratio and quantity adjustable
5.Auto cleaning
6.Glue tank Vacuum Defoaming (Optional)
7.Glue barrels,metering pump,glue pipe can be heating (Optional)

 

Suitable Material: For waterproof, adhesive, fixed two-component adhesive.
Such as: Crystal or less additive glue --Silicone, epoxy, polyurethane(PU), etc.
Applications:LED products ,Crafts,Electronic components
Such as:Wall washer light, LED bar, LED strip, Ads module, Sensor, Photovoltaic module, Photovol­taic inverter .etc

I.Machine description and working principle

Automatic glue mixing machine is mainly used for a two-component glue( Epoxy/ Silicone/PU,etc adhesive), automatic metering and mixing the ratio of glue. The glue are stored in two barrels separately, according the glue weight ratio and volume demand automatic metering by two sets of precision pump, supply to a mixing device fully mixing, and then potting/dispensing the desired products.

II.Main Function:

1.Automatic metering and mixing

2.Manual Gluing

3.Auto alarm for lack of material or full material

4.Gluing ratio and quantity adjustable

5.Auto cleaning

6.Glue tank Vacuum Defoaming (Optional)

7.Glue barrels,metering pump,glue pipe can be heating (Optional)

 

III.Specification:

Model No:	PGB-700
Mixing Ratio	100:100-10:100(1:1-1:10) Adjustable
Metering precision	±1%
Outflow speed	1g/sec-15g/sec
Mixing precision	±1%
Mixing mode	Dynamic mixing /Static mixing
Glue Viscosity	Lower than 20000 CPS(mPa·s)
Control mode	PLC + Touch Screen
Control system	Independent R&D
Measuring mode	Stepping motor/High-precision, wear-resistant, long-life Gear pump
Working voltage	AC 220V 50Hz/60Hz
Power requirement	3.55KW
Air pressure requirement	4.5-8KG
Machine Dimension	1500(L)*1200(W)*1500(H)mm
Weight	approx 260 KG
Work environment	Humidity: 20%~98%RH; Temperature: 0~+40°c

 

Suitable Material: For waterproof, adhesive, fixed two-component adhesive.

Such as: Crystal or less additive glue --Silicone, epoxy, polyurethane(PU), etc.

Applications:LED products ,Crafts,Electronic components

Such as:Wall washer light, LED bar, LED strip, Ads module, Sensor, Photovoltaic module, Photovol­taic inverter .etc

IV:Application

V, packing