Two part polyurethane belt machine Led strip light dispensing machine
1. Features
1). An automatic system of simultaneous metering, mixing and dispensing
2). Glues ratio and out-gluing quantity can be adjusted easily and freely
3). Precise mixing helps to avoid possible glue waste in working
4). Easy to operate and program
5). Easy to disassembly and install
6). The configuration could be changed according to customers' demand
7) It can be installed with 1-8 nozzles to improve productivity
8). Vacuum and automatic cleaning
2. Industrial Application
LED modules, LED bar / banner light, LED wall washer, liner lights, LED display, graphics, electric components, circuit, PCB board and other regions where gluing shooting & injecting is needed.
| Model & Type |
PG-1500 Full Auto Gluing Machine Dispenser |
| Certificate |
CE, SGS |
| Dimension |
1900x1400x1500mm |
| N.W. |
320kg |
| XYZ Working Area |
1500x1500x80 |
| Flow Speed |
0-66g/5s, or customized |
| Moving Speed |
0-300mm per second |
| Glue & Ratio |
1:1 to 20:1, Epoxy, Silicone, PU, UV |
| Repeatability |
+/-0.02g |
| Accuracy |
+/- 1% |
| Power |
AC220V or AC 380V |
| Total Power Consume |
3kw - 5kw |
| Additional Functions |
Heating, Vacuum, Self-refilling, Self-cleaning |
| Application |
LED modules, LED bar / banner light, LED wall washer, liner lights, LED display, graphics, electric components, circuit, PCB board and other regions where gluing shooting & injecting is needed. |
Introduction :
1. Working Area: controlled by PLC module and MCGS touch screen.
2.High precision valve: high speed, glue off clean, no glue drawing, no dropping.
3. Gear pump special for transparent glue.
4. Mix glue A & B more evenly; no more or no less for agent B.
Working principle :
Compound materials A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine for metering A and B resin by setting ratio, draining out material individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.
Tank system technology :
1. Stainless panel vacuum pressure tank which can bear negative pressure of inner tank .
2. Tank with motor stirrer that prevent the glue from sediment and keep the potting material in constant temperature.
3 Tank with top/ high /low liquid sensors that ensure alarm warning when liquid higher or lower the setting level .
4 Tank with vacuum degas (degas time can be set through touch screen), so the material can be re-feeding through vacuum negative pressure .
5 Tank with pressure releasing ball valve ; the bottom of tank reserved back-flow connector and river closure ball valve.
6 Tank with artificial feeding mouth that can be added glue appropriately by hand .
7 Tank with silica-dryer which can prevent material especially PU from crystallization .
Pump technology
1. Two cylinder plungerpump /gear pumps are work by durable motors.
2.The biggest flow volume is customable .
3.Also Suitable for high viscosity glue: 50cps~35000cps.
4. Suitable for big flow dispensing or slight flow dispensing.
5. Suitable for frequent start and stop dispensing.
6. Anti-wear, Anti-corrosion, super long life time.
Valve technology
1. Two cylinder plunger pumps work by durable motors.
2.The biggest flow volume :24g/s,Repetition accuracy:0.2g.
3.Also Suitable for high viscosity glue: 50cps~35000cps.
4. Suitable for big flow dispensing or slight flow dispensing.
5. Suitable for frequent start and stop dispensing.
6. Anti-wear, Anti-corrosion, super long life time.
| Working area |
5100mm×400mm×100 mm |
| Working speed |
250mm/s |
| Precision |
+/-0.1mm |
| Ratio |
1 :1 ---10:1 |
| Glue-out speed |
1g/s --15g/s |
| Mixing precision |
+/-2% |
| Program memory |
20pcs |
| Glue viscosity |
300cps~50000cps |
| Operation mode |
Manual / automatic / third party single |
| Controlling system |
PLC/ Daheng gear pump |
| Flow control |
Digital input |
| Program |
teaching programming |
| Automatic controlling system |
Touch screen / hand switch |
| Mixing method |
Dynamic mixing (including self-cleaning function) |
| Tanks |
Stainless tank A(25L) and tank B (10L) |
| Liquid level sensor (low liquid level / high liquid level and limiting liquid level ) |
| Tank stirring |
| Constant temperature heating (A tank ;A pump and A pipes) |
| Glue filter |
| Power |
220V/50Hz/3500W |
| Input air pressure |
0.4MPa-0.7MPa |
| Dimension |
5100mm×400mm ×30mm |
| Appearance material |
cold-roll steel plate / Industrial aluminium/stainless / metal plate |
Machine structure :
| Item |
Configuration |
quantity |
Brand |
| Main Frame |
foundation frame--Steel welded structure |
1 sets |
Made in China |
| Metal plate |
1 sets |
Made in China |
| Castor |
4 sets |
Made in China |
Controlling system |
PLC |
1 set |
Panasonic |
| Software system |
1 set |
Daheng patent |
| Industrial human-computer interface touch screen |
1 pc |
MCGS |
| Metering pump motor / Driver |
2 sets |
Lakeside |
| Photoelectric proximity switch |
8 sets |
YAMATAKE |
| Metering pump bearing |
4 sets |
NSK |
| Pneumatic component(solenoid/pressure regulating valve/Pneumatic duplex) |
pcs |
Air tac |
| Electronic component(relay/cocontactor/power supply/leakage switch) |
pcs |
CHNT |
| Three axis system |
Synchronous belt |
2 sets |
PMI-GROUP |
| Motor/driver |
2 sets |
Lakeside |
| Z axis |
1 set |
Air tac |
| Glue supplying System |
Stainless tank A |
1 group |
Made in China |
| Stainless tank B |
1 group |
Made in China |
| Pipe and tank heater (adjustable temperatures) |
2 pcs |
Made in China |
| Temperature control instrument |
2 pcs |
Made in China |
| AB tank stirring motor |
2 pcs |
DDK |
| Gear pump 3.6 |
1 set |
Daheng |
| Gear pump 1.2 |
1 set |
Daheng |
| Dynamic double liquid valve |
1 set |
Daheng patent |
| High quality tube |
2 pcs |
Made in China |
| Self-cleaning |
1 set |
Made in China |
Audited Supplier 
){kind=link}
){kind=link}